Memoria Notebook Kingston Kvr26s19s6/4 2666mhz1.2v 4gb Ddr4
em 12x
Descrição
KVR26S19S6/4
4GB 1Rx16 512M x 64-Bit PC4-2666
CL19 260-Pin SODIMM
Informações
ValueRAM, a memória padrão do setor da Kingston, oferece um desempenho premiado e a reconhecida confiabilidade Kingston. Quando você sabe o que quer, você escolhe ValueRAM.
Atributos
Marca: Kingston
Largura (bruto) [m]: 0.01
Profundidade (bruto) [m]: 0.01
Peso (bruto) [Kg]: 0.018
Altura (bruto) [m]: 0.15
Memória Clock: 2666MHz
Garantia Fabricante: 1 Ano
Memória Tipo: DDR4
Capacidade: 4GB
Memória para: Notebook
DESCRIPTION
This document describes ValueRAM's KVR26S19S6/4 as a
512M x 64-bit (4GB) DDR4-2666 CL19 SDRAM (Synchronous
DRAM), 1Rx16, memory module, based on four 512M x 16-bit
FBGA components. The SPD is programmed to JEDEC
standard latency DDR4-2666 timing of 19-19-19 at 1.2V. This
260-pin SODIMM uses gold contact fingers. The electrical and
mechanical specifications are as follows:
FEATURES
- Power Supply: VDD = 1.2V Typical
- VDDQ = 1.2V Typical
- VPP = 2.5V Typical
- VDDSPD = 2.2V to 3.6V
- Nominal and dynamic on-die termination (ODT) for
data, strobe, and mask signals
- Low-power auto self refresh (LPASR)
- Data bus inversion (DBI) for data bus
- On-die VREFDQ generation and calibration
- Single-rank
- On-board I2 serial presence-detect (SPD) EEPROM
- 8 internal banks; 2 groups of 4 banks each
- Fixed burst chop (BC) of 4 and burst length (BL) of 8
via the mode register set (MRS)
- Selectable BC4 or BL8 on-the-fly (OTF)
- Fly-by topology
- Terminated control command and address bus
- PCB: Height 1.18” (30.00mm)
- RoHS Compliant and Halogen-Free
SPECIFICATIONS
CL(IDD): 19 cycles
Row Cycle Time (tRCmin): 45.75ns(min.)
Refresh to Active/Refresh|Command Time (tRFCmin): 350ns(min.)
Row Active Time (tRASmin): 32ns(min.)
Maximum Operating Power: TBD W*
UL Rating: 94 V - 0
Operating Temperature: 0graus C to + 85graus C
Storage Temperature: -55graus C to + 100graus C
*Power will vary depending on the SDRAM used.